Select quality process heating equipments for your labs

Buying laboratory coolers or chillers is no child’s play. You will have to make sure that you have the basic knowledge of the laboratory chillers before you buy the laboratory chillers. The best way of buying the laboratory chillers or coolers is to buy them from online stores. Your laboratory chiller or cooler will be dispatched and reach your laboratory once you have made the online payment.

Coolers and heaters are also used in industrial setups. Most of the process heating and cooling are done by the industrial coolers and heaters. In the laboratory, you will find the need for portable coolers and heaters. There are some key features that make a laboratory cooler a better one.

Good laboratory coolers or heaters have extra large displays to give you the best readings. So, even if you forget to wear your reading glasses, you will not have a problem in reading the readings on the good quality laboratory cooler or heater.

The laboratory coolers or heaters have built in alarm systems that will give alarms when the flow is low or when the temperature is out of the specified range. In the laboratory environment, noise levels have to be controlled. Most of the good quality laboratory coolers and heaters are low noise coolers and heaters.

Portable laboratory chillers or heaters have wheels that allow the easy transferability of the laboratory chillers or heaters. Most portable chillers or heaters are not bulky and they take very less space in the laboratory place.

Tricool is one the suppliers and manufacturer of units like thermal fluid heaters, thermal fluid systems, and other bespoke fluid heating units

Previous Post : The most economical way to use your Process heating system

The most economical way to use your Process heating system

Drying and Process heating is an integral part of production process in any industry, e.g. melting, moulding, drying, cooling, all form part of production. An economical way to use energy is the concern of every industry, more so if it involves production. Here are some ways in which energy can be saved by following some simple tips:

1.Installing heat recovery equipment i.e. Equipment to reuse heat from an already completed process makes a lot of sense.
2.Insulation of all pipe work including flanges and valves can cut costs by 5%.
3.Avoiding small production units as the equipment has to run for the full time without maximum capacity, this could lead to wastage of energy.
4.Switching off equipment after office hours and during weekends.
5.Switching over to automatic control saves more energy than working on manual control.
6.The lowest most effective temperature has to be identified and maintained during process heating, this saves money and energy.
7.Proper maintenance of the equipment is a must, regular servicing has to be ensured and a check has to be kept in order to identify equipment which has to be upgraded.
8.Alternatives to process heating can also be considered such as Microwave processing, using catalysts etc.

However, professionals in process heating can be contacted to get the best results for your industry’s heating requirements. They help not only in reducing costs but also in getting the right equipment for the right job.

Tricool specialises in thermoregulator units and other tool heaters and thermoregulators.

Previous Post : Rent MTA chillers for your industry needs

Rent MTA chillers for your industry needs

If you want to start a cooling system business, you need to be aware of the different equipments or systems that you can venture into. A typical cooling and air conditioning services would offer services for industrial cooling system like Air Cooled Screw Chiller, Water Cooled Screw Chiller, Drycool Cooling Tower, Compressed Air Dryer, Air Cooling System, Double Skin Air Handling Unit, Commercial Air Conditioning Systems, Industrial Chillers, Panel Air Conditioner and Industrial Chillers.

If you are looking at offering customized cooling services, then you need to have the experts by your side. Most customers will come up with complicated cooling needs and you need to be prepared for any type of situation. The rent and manufacture MTA chillers is a good business option these days. An MTA chiller is one of the best chillers in today’s cooling market scenario. You need to give your customers a range of cooling equipments to make the selection process easier for the client. If you feel that the customer is not buying the right cooling equipment, then you will have to make sure that you give them the right advice.

It is not easy to tell customers upfront that their selections are wrong, so it is imperative that you be very diplomatic in your approach. When you are advising your customer on the right kind of cooling, you need to keep in mind the budget of the customer. When customers are low on budget, it is always recommended to give the customer the most affordable solution. However, you will have to brief the customer on the pros and cons of buying the cheaper and affordable cooling systems.

Previous Post : Screw industrial chillers

Screw industrial chillers

Industrial chillers are cooling devices or systems that are used to cool machinery or the environment in which the machinery is kept. Wherever there is a need for constant temperature, the industrial heaters or chillers are used. If your industrial process gets affected by rise or fall of temperature, then you need to have the right cooling or heating system.

Industrial chillers are of three basic types – air, water and evaporative condensed. There are subcategories for these three types of industrial chillers. These sub categories are centrifugal, reciprocating, absorption and screw driven. An industrial unit needs to have high efficiency and low cost of maintenance.

The ammonia chiller units are regarded as chiller units that have optimum operational efficiency and very low cost of maintenance. In addition to these two features, you will also find that the ammonia screw chillers have trouble free operation and low power consumption.

These ammonia chiller units are generally used in private institutions, manufacturing units, injection molding industry, pharmaceutical industry, chemical industry and other industries. In the screw chiller category, you can also opt for the water cooled chiller units. Most water cooled chillers of today are fully microprocessor based.

These modern water cooled chillers are most suitable for process cooling applications from (+) 20°C upto (-) 15°C. When you are buying the water cooled chiller units, ensure that they are energy efficient. The industrial chillers that need a lot of energy can affect overall costs and thereby reduce profits. You can choose between air cooled or water cooled chillers for your industrial cooling needs.

Previous Post : Broadband dongles: Easy way to connect to the Internet on the move